Nanodax Glass-Wool-Filled-Polypropylene

[Padraicsdad]

Naoto,

Do you have the PP sheet yet? Does it lie flat enough on the bed with just clips around the edges?

Jeff

[NaotoSakaue]

Hi Jeff.

I got a OPP sheet from nearby 1 coin shop. Thickness is 1mm.
I understand your worry.  I do not know until I try. If it's flatness is too bad, I will test 2mm thick plate.
I hope I can do it by next week.    I am busy now to find the best way to attach the tape on the Aluminum bed of Makerbot.  Sticking strength between PP tape and Aluminum bed is weaker than glass bed.

Naoto Sakaue

[luciancd]

I would like to try your filament @ Mr. Sakaue.

When is it going to be released ?

[NaotoSakaue]

Hi Luciancd.

It will be released soon.  But If you want to test it now, please visit http://www.haymaa.com/3d-eng/.  There are some informations of GWPP and my contact info. Please drop me an email.


Hi Jeff

I have tested PP sheep.  Result was super!  It attaches forever!.  You can't remove it.
That is just a tasting. Maybe I change the 1st layer gap and temperature and see how it become.
Meanwhile, I found another tape to which PP attach.   It is PE tape(tack weld tape). It looks like PP packing tape but colored.
It stick well against PP. I feel easier than PP when I remove parts.  And it won't tear off when you remove parts.  You can use it several times.

[Padraicsdad]

Hi Naoto,

I also ordered a PP sheet and expect it to arrive today. It is .093"/2.36mm thick X 12"/305mm X 24"/610mm so I'll have plenty to use for experiments. Now that I know what happened to you I'll try increasing the nozzle gap, lowering nozzle temp and no bed heat. I'll post my results.

This is just for fun, however. I'm perfectly happy with the way GWPP sticks to packing tape and expect to enjoy the same success as you and Julia printing it directly onto the M200's bed.

Jeff

[NaotoSakaue]

Finally, web shop was opened! 
http://haymaa.com/3d-eng/

This Gozirra was made using GWPP.
http://tamashii.jp/special/humansize/godzilla/

[FrankJScott]

Please try Google before asking about Awesome Product Info f4_595d

[FrankJScott]

Please try Google before asking about New Product Guide ef7bd75

[FrankJScott]

Please try Google before asking about Great Product Guide 00d2fd2

[FrankJScott]

Please try Google before asking about Great Product Tips 2a659ef