1
Materials Compatibility / Re: Nanodax Glass-Wool-Filled-Polypropylene
« on: September 19, 2016, 04:19:43 AM »
I would like to try your filament @ Mr. Sakaue.
When is it going to be released ?
When is it going to be released ?
User Forum
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
General Discussion / When do i need to change the PTFE tube of my ZT-HE ?
« on: September 08, 2016, 07:16:47 PM »
Is there a "sign" to when i should change the PTFE tube on the ZT-HE ?
I am printing PC-MAX at 265°C. Do you have a guess on how many hours i can print
at such a high temperature @ Julia ?
I tried printing at 250°C - 260°C, but the support material seems to detach easier from the raft
during print at those temperatures.
Lucian
I am printing PC-MAX at 265°C. Do you have a guess on how many hours i can print
at such a high temperature @ Julia ?
I tried printing at 250°C - 260°C, but the support material seems to detach easier from the raft
during print at those temperatures.
Lucian
3
News and Announcements / Re: Z-Suite 1.6 is out, but...
« on: June 22, 2016, 09:23:30 AM »
it seems that the infill "MAXIMUM" has a maximal MAXIMUM in HIGH speed mode !
It generates about 50% more infill than Z-Suite did before !
It generates about 50% more infill than Z-Suite did before !
4
News and Announcements / Re: Z-Suite 1.6 is out, but...
« on: June 21, 2016, 05:02:35 PM »
sadly MAXIMUM infill = FULL infill
more info:
http://forum.zortrax.com/index.php?/topic/2621-z-suite-16-maximum-infill-vs-full-infill/
more info:
http://forum.zortrax.com/index.php?/topic/2621-z-suite-16-maximum-infill-vs-full-infill/
5
News and Announcements / Re: Z-Suite 1.6 is out, but...
« on: June 21, 2016, 12:26:18 PM »i have to compare this again
6
News and Announcements / Z-Suite 1.6 is out, but...
« on: June 21, 2016, 11:56:28 AM »
The URL to Z-Suite 1.6 for Windows is wrong, it points to the OSX Version. Because Zortrax a filename pattern i managed to imply the URL:
http://support.zortrax.com/wp-content/uploads/2016/03/Z-Suite_V1.6.0_Win.zip
http://support.zortrax.com/wp-content/uploads/2016/03/Z-Suite_V1.6.0_Win.zip
7
Materials Compatibility / Re: Best filament for least warping but still glue-able?
« on: June 17, 2016, 04:15:53 PM »
Do you have a window open that could give your print a lot of fresh air ?
8
Materials Compatibility / Re: Best filament for least warping but still glue-able?
« on: June 17, 2016, 04:05:14 PM »I doubt that higher infill will fix layer splitting. If ABS wants to warp, it will find a way.
Parts printed on my mendelmax with 100% infill are much more robust than with a zortrax 100% infill. Also why shouldn't the space two layers share with eachother not influence the force needed to separate those two ?
I made a mistake when i red about the xy-crack, i overlooked that tthis happens during printing not after printing. So the 100% infill won't solve that.
9
General Discussion / Re: What i need to order?
« on: June 17, 2016, 03:49:18 PM »Two days after i ordered from Julia the reseller got added.
Yes that is true
But the reseller did not have stock until more than 3 weeks after your order shipped
10
General Discussion / Re: What i need to order?
« on: June 17, 2016, 10:28:23 AM »
2 weeks ago there was a 20% discount on first z-temp orders in the german shop. Isnt there also an import tax in switzerland that you also have to add?
For me it was a 60 Euro difference. Two days after i ordered from Julia the reseller got added.
For me it was a 60 Euro difference. Two days after i ordered from Julia the reseller got added.
11
Materials Compatibility / Re: Best filament for least warping but still glue-able?
« on: June 17, 2016, 07:59:18 AM »
I was told that there is going to be an z-suite update allowing a higher infill very soon.
This could also solve your xy cracking problem.
Lucian
This could also solve your xy cracking problem.
Lucian
12
General Discussion / Re: What i need to order?
« on: June 17, 2016, 07:56:02 AM »
Please notice that there is a german reseller that can save u some shipment cost !
http://www.z-temp.co/misc/z-temp-resellers.html
Lucian
http://www.z-temp.co/misc/z-temp-resellers.html
Lucian
13
General Discussion / Re: Do you need dual fans to achived best results with PLA filament
« on: June 13, 2016, 04:57:51 PM »
Thank you ! I havent printed with pla that much. I was happy with the results i got with single fan, there was only a little warping present.
It would be nice to see some before / after images.
It would be nice to see some before / after images.
14
General Discussion / Re: Do you need dual fans to achived best results with PLA filament
« on: June 12, 2016, 06:21:48 PM »
Is there a tutorial on how to install a dual fan on the m200 ?
15
Materials Compatibility / Re: Saintsmart TPU
« on: June 11, 2016, 10:23:57 AM »
What filament did u use before the tpu ?