Now available from the usual place
http://www.z-temp.co/Downloads/RaftAway.zipYou can set speed scaling anywhere from 50 to 100%. So far the results have been spectacular: 10 different types of TPA, TPE, and TPU that we were previously unable to print with, all printed great when speed was reduced by 50% from Z-Suite "Normal" quality speed.
Actually, they all printed pretty well at full speed now that RaftAway can remove the raft - it was the high extrusion rates called for during raft printing that caused failures in the past. But with reduced speed, even the "fast" features like support and infill print with no underextrusion. So far we've only tried 50%, but I think 70% or even 80% should work.
Here's a list of flexibles tested successfully today:
NinjaFlex
TreeD Flex Mark 7 TPU
Treed Flex Mark 9 TPU
FilaFlex
TreeD UltraFlexx TPE
TreeD UltraFlexx+ TPE
TreeD FlexAbility TPA
TreeD Flexability+ TPA
eSun eLastic TPE
TreeD's catalog says that of all their filaments, Flex Mark 7 is
"the most flexible, but it requires a perfect calibration of the printer". Well, I didn't do anything special at all - I was printing PLA production parts on the machine, whacked in the flexible stuff without changing anything except temperature, and just started printing. That gives you an idea how well well this combo can perform!