Hi Max,
The standard ZT-HE has a PTFE insert, which is part of what makes it work well with PLA. PTFE starts to breakdown above 240C, however, so it's not great for Z-ABS, which runs around 275C. A lot of third-part ABS, however, runs at 230C, so that would be OK with the PTFE ZT-HE. If you want to run materials that need temps above 240C then the PTFE version is not a good choice and the all-metal version would be preferred.
So the short answer is, no, ZT-HE is not a universal solution for all materials, sorry. I can, however, swap hot ends on the M200 in less than a minute