1
News and Announcements / Re: Nanodex of Japan Demonstrates Glass-Wool (not fiber) PP filament using Z-Temp
« on: February 22, 2017, 07:33:31 PM »
Thank you Paul.
I put them in my list.
I put them in my list.
User Forum
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
News and Announcements / Re: Nanodex of Japan Demonstrates Glass-Wool (not fiber) PP filament using Z-Temp
« on: January 11, 2017, 09:19:34 PM »
z-renegade
Your server won't receive my email to you.
Do you have another address?
N.S
Your server won't receive my email to you.
Do you have another address?
N.S
3
News and Announcements / Re: Nanodex of Japan Demonstrates Glass-Wool (not fiber) PP filament using Z-Temp
« on: January 04, 2017, 10:26:05 PM »
z-renegade
Sorry fo rthe late reply. I haven't visited here for long.
It will be great help if you can!
Would you send me an email to sakaue@nanodax.com?
Best regards
Naoto Sakaue
Sorry fo rthe late reply. I haven't visited here for long.
It will be great help if you can!
Would you send me an email to sakaue@nanodax.com?
Best regards
Naoto Sakaue
4
News and Announcements / Re: Nanodex of Japan Demonstrates Glass-Wool (not fiber) PP filament using Z-Temp
« on: December 11, 2016, 05:40:39 PM »
Oh, you know about that!
Yes. we are working with Covestro now. But we limited their right of use our IP only to PC.
Their application is gW filled PC pellet for molding and they do not interested in Filament which is the end product. Some times a go I saw an article which said that they established an organisation which develop the plastics especially for 3D printing appreciation. But that is the plastic pellet (or powder) as the material for filament (or for other than FDM method)
So, we are looking for someone who wants to sale our GWPP filament in Europe. We are discussing with someone in US and Australia about their becoming a rep' now.
Yes. we are working with Covestro now. But we limited their right of use our IP only to PC.
Their application is gW filled PC pellet for molding and they do not interested in Filament which is the end product. Some times a go I saw an article which said that they established an organisation which develop the plastics especially for 3D printing appreciation. But that is the plastic pellet (or powder) as the material for filament (or for other than FDM method)
So, we are looking for someone who wants to sale our GWPP filament in Europe. We are discussing with someone in US and Australia about their becoming a rep' now.
5
News and Announcements / Re: Nanodex of Japan Demonstrates Glass-Wool (not fiber) PP filament using Z-Temp
« on: December 10, 2016, 07:43:45 PM »
Hi z-renegade.
We do not have resaler nor rep' in Europe yet. So sorry about that.
Naoto Sakaue
NANODAX
We do not have resaler nor rep' in Europe yet. So sorry about that.
Naoto Sakaue
NANODAX
6
News and Announcements / Re: Nanodex of Japan Demonstrates Glass-Wool (not fiber) PP filament using Z-Temp
« on: October 25, 2016, 05:51:39 AM »
This huge Gozirra was made using GWPP!
http://tamashii.jp/special/humansize/godzilla/ (No English info is available)
Price is $40,000.
Finally, web shop was opened!
http://haymaa.com/3d-eng/
http://tamashii.jp/special/humansize/godzilla/ (No English info is available)
Price is $40,000.
Finally, web shop was opened!
http://haymaa.com/3d-eng/
7
Materials Compatibility / Re: Nanodax Glass-Wool-Filled-Polypropylene
« on: October 25, 2016, 05:31:40 AM »
Finally, web shop was opened!
http://haymaa.com/3d-eng/
This Gozirra was made using GWPP.
http://tamashii.jp/special/humansize/godzilla/
http://haymaa.com/3d-eng/
This Gozirra was made using GWPP.
http://tamashii.jp/special/humansize/godzilla/
8
Materials Compatibility / Re: Nanodax Glass-Wool-Filled-Polypropylene
« on: September 21, 2016, 08:25:06 PM »
Hi Luciancd.
It will be released soon. But If you want to test it now, please visit http://www.haymaa.com/3d-eng/. There are some informations of GWPP and my contact info. Please drop me an email.
Hi Jeff
I have tested PP sheep. Result was super! It attaches forever!. You can't remove it.
That is just a tasting. Maybe I change the 1st layer gap and temperature and see how it become.
Meanwhile, I found another tape to which PP attach. It is PE tape(tack weld tape). It looks like PP packing tape but colored.
It stick well against PP. I feel easier than PP when I remove parts. And it won't tear off when you remove parts. You can use it several times.
It will be released soon. But If you want to test it now, please visit http://www.haymaa.com/3d-eng/. There are some informations of GWPP and my contact info. Please drop me an email.
Hi Jeff
I have tested PP sheep. Result was super! It attaches forever!. You can't remove it.
That is just a tasting. Maybe I change the 1st layer gap and temperature and see how it become.
Meanwhile, I found another tape to which PP attach. It is PE tape(tack weld tape). It looks like PP packing tape but colored.
It stick well against PP. I feel easier than PP when I remove parts. And it won't tear off when you remove parts. You can use it several times.
9
Materials Compatibility / Re: Nanodax Glass-Wool-Filled-Polypropylene
« on: September 18, 2016, 04:28:09 AM »
Hi Jeff.
I got a OPP sheet from nearby 1 coin shop. Thickness is 1mm.
I understand your worry. I do not know until I try. If it's flatness is too bad, I will test 2mm thick plate.
I hope I can do it by next week. I am busy now to find the best way to attach the tape on the Aluminum bed of Makerbot. Sticking strength between PP tape and Aluminum bed is weaker than glass bed.
Naoto Sakaue
I got a OPP sheet from nearby 1 coin shop. Thickness is 1mm.
I understand your worry. I do not know until I try. If it's flatness is too bad, I will test 2mm thick plate.
I hope I can do it by next week. I am busy now to find the best way to attach the tape on the Aluminum bed of Makerbot. Sticking strength between PP tape and Aluminum bed is weaker than glass bed.
Naoto Sakaue
10
Materials Compatibility / Re: Nanodax Glass-Wool-Filled-Polypropylene
« on: September 14, 2016, 11:40:16 PM »
Yes, Julia. You are correct. I neither apply tape to M200. But to test PP sheet, M200 is easy for me to use. Sorry for making you confused.
I will cut the 1.6mm PP sheet into the bed size and fix on the bed using 4 clips. Then adjust the Z-sense. That's all. I expect 1)attaching is good , 2)removing print is easy and 3)can be used many times.
I will cut the 1.6mm PP sheet into the bed size and fix on the bed using 4 clips. Then adjust the Z-sense. That's all. I expect 1)attaching is good , 2)removing print is easy and 3)can be used many times.
11
News and Announcements / Re: Nanodex of Japan Demonstrates Glass-Wool (not fiber) PP filament using Z-Temp
« on: September 14, 2016, 10:41:05 PM »
Hi Jimm.
Yes, you are right. That is one of the reason why PP is used to wide variety of plastic products. Black is going to be tested soon followed by other bright colors.
Naoto Sakaue
Yes, you are right. That is one of the reason why PP is used to wide variety of plastic products. Black is going to be tested soon followed by other bright colors.
Naoto Sakaue
12
Materials Compatibility / Re: Nanodax Glass-Wool-Filled-Polypropylene
« on: September 14, 2016, 10:24:54 PM »
Hi Jeff.
I suppose quality of surface is almost perfect, looks like almost the same as what I am doing here. The printer kit was built in good and set properly.
I am thinking to test thick, 1.6mm, PP sheet instead of tape. Julia's Z-sense is useful to this idea.
I suppose quality of surface is almost perfect, looks like almost the same as what I am doing here. The printer kit was built in good and set properly.
I am thinking to test thick, 1.6mm, PP sheet instead of tape. Julia's Z-sense is useful to this idea.
13
Materials Compatibility / Re: Nanodax Glass-Wool-Filled-Polypropylene
« on: August 26, 2016, 08:19:47 PM »
Hi Mike.
We plan to release this filament at end of SEP.
I am thinking to look for someone who is keen to sale this filament in US.
Sakaue
We plan to release this filament at end of SEP.
I am thinking to look for someone who is keen to sale this filament in US.
Sakaue
14
Materials Compatibility / Re: Nanodax Glass-Wool-Filled-Polypropylene
« on: August 26, 2016, 06:21:53 AM »
I just want to show you the picture of huge vase which Ninjapod's engineer made using their 700mm x 700mm printer. He made two of this and no problem occurred during the process.
CEO of Ninjabot poured water in the vase and tried to lift it up but failed. It was too heavy for him. It did not tear apart. That is what I heard from the chief engineer who made it. He tried making the same vase using ABS/PLA but failed due to warping and saggy layer issues.
CEO of Ninjabot poured water in the vase and tried to lift it up but failed. It was too heavy for him. It did not tear apart. That is what I heard from the chief engineer who made it. He tried making the same vase using ABS/PLA but failed due to warping and saggy layer issues.
15
News and Announcements / Re: Nanodex of Japan Demonstrates Glass-Wool (not fiber) PP filament using Z-Temp
« on: August 12, 2016, 11:27:12 PM »
Got it. I will push planning side.
Pages: [1] 2