Z-Temp Forum

Z-Temp Products => Materials Compatibility => Topic started by: JeX2 on July 08, 2016, 05:53:55 AM

Title: Colorfabb nGen
Post by: JeX2 on July 08, 2016, 05:53:55 AM

Hello,

I must show you some good results with my colorfabb nGen prints. My settings are:

• Z-ABS - 40°C (235°C)
• 90-140 microns
• single fan/ fan speed: auto
• ZT-HE Hot End
• Raft layers heatbed on, then off (position 3 -> 0)

Title: Re: Colorfabb nGen
Post by: Julia Truchsess on July 08, 2016, 06:42:42 PM

Very nice indeed, thanks for posting! I did some tests with nGen (also at 235º) using the Zortrax hot end and was pleased with the extrusion. Didn't like the warping on the flat frame members I was printing at the time, though, so haven't gone back to it. Looks great on your parts.